Filtri

Zadnje pregledano

ARDUINO PRO MINI 328 - 3.3V-8MHZ, SPARKFUN, DEV-11114

  • Zaliha GALAGO: DA, 2 kom/da
    Zaliha DOBAVITELJ: DA, 107 kom/da
  • Dobava 7 dani
  • Marka: SPARKFUN
  • Id broj: 1424/
14,50 €

 

 

Product details

 

This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.

 

This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin on not VCC.

 

Dimensions: 0.7x1.3" (18x33mm)

 

Features:

 

- ATmega328 running at 8MHz with external resonator (0.5% tolerance)

- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers,   sensors, etc)

- 0.8mm Thin PCB

- USB connection off board

- Weighs less than 2 grams!

- Supports auto-reset

- 3.3V regulator

- Max 150mA output

- Over current protected

- DC input 3.3V up to 12V

- On board Power and Status LEDs

- Analog Pins: 8

- Digital I/Os: 14

 

Documents:

 

- Schematic

- Eagle Files

- Getting Started Tutorial

- Graphical Datasheet

- GitHub

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.