Proizvod trenutno nije na zalihi. Ispod se možete prijaviti i poslat ćemo vam obavijest kada će proizvod biti na zalihi. Obavijest ćete dobiti samo za ovaj proizvod.
Za traženi proizvod pošaljite poruku/upit nakon čega ćemo vas kontaktirati.
Za traženi proizvod pošaljite poruku/upit nakon čega ćemo vas kontaktirati.
The Relay is a digital normally open switch that controls a relay capable of switching much higher voltages and currents than your normal Arduino boards. When set to HIGH, the LED will light up and the relay will close allowing current to flow. The peak voltage capability is 250V at 10 amps.
Please exercise great care when working with mains voltages— if in doubt contact a professional such as a licensed electrician for help.
Dimension: 42.00mm*24.00mm*19.50mm
For all Grove users (especially beginners), Seeedstudio provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
Documents
Please visit Seeedstudio wiki page for more info about this product. It will be appreciated if you can help them improve the documents, add more demo code or tutorials. For technical support, please post your questions to Seeedstudio forum.