Filtri

Zadnje pregledano

MICROSD CARD BREAKOUT BOARD, ADAFRUIT 254

  • Zaliha GALAGO: DA, 1 kom/da
    Zaliha DOBAVITELJ: DA, 279 kom/da
  • Dobava 7 dani
  • Marka: ADAFRUIT
  • Id broj: 398/55
10,48 €

Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use.

 

 - Onboard 5v->3v regulator provides 150mA for power-hungry cards

- 3v level shifting means you can use this with ease on either 3v or 5v systems

- Uses a proper level shifting chip, not resistors: less problems, and faster read/write access

- Use 3 or 4 digital pins to read and write 2Gb+ of storage!

- Activity LED lights up when the SD card is being read or written

- Four #2 mounting holes

- Push-push socket with card slightly over the edge of the PCB so its easy to insert and remove

- Comes with 0.1" header (unattached) so you can get it on a breadboard or use wires - your choice

- Tested and assembled here at the Adafruit factory

- Works great with Arduino, with tons of example code and wiring diagrams

 

For details on getting started, check out Adafruit detailed tutorial discusses microSD cards, wiring and how to use this breakout board with an Arduino

 

Dimensions (without 0.1" header):

 

- Length:31.85mm

- Width:25.4mm

- Height:3.75mm

- Weight:3.43g

 

Downloads:

 

The files and schematics are at the github repository

netduino driver, netduino sample and Documentation parts one and two

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.