Obvesti me
Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Vaš email naslov:
  CAPTCHA Image
Varnostna koda:

Pretraživanje
Hrvatski
Slovenski
Hrvatski
English
Deutsch
Italiano
Srpski
Prijava Registracija
NOVI ARTIKLI
AKCIJE
NAJPRODAVANIJI
Troškovi dostave
Odaberi državu
Austria
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Malta
Montenegro
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
Spain
Sweden
United Kingdom
Poštna dostava 5.00 EUR
 
Informacije
Uvjeti i informacije
Pitajte nas
Galago elektronika
Galago d.o.o.
Trg svobode 20
2390 Ravne na Koroškem
Slovenija
E-mail: info@galago.si
Telefon: 00386 (0)2 620 08 14
Telefon: 00386 (0)40 559 432
Facebook

VCNL4000 PROXIMITY-LIGHT SENSOR, ADAFRUIT 466

  Id broj: 320
Marka:ADAFRUIT
Zaliha:   DA
Cijena:11,04 €
 

The VCNL4000 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. For longer distances (in the range of cm, you can use a SHARP IR distance sensor, but those are only good if the object is over 10 cm away. The VCNL4000 is designed for much shorter distances, no more than 200mm (about 7.5") and under our experimentation we found it worked best at distances of about 10-150mm. It would be good for say detecting when a hand moved nearby, or before a robot smacks into a wall. The sensor also has an ambient light sensor built in. 

 

This sensor is easy to use with any microcontroller that has i2c capability. It is 5 volt compliant so you can use it with 3.3V or 5V logic with no risk of damage. There is an onboard 3.3V ultra low dropout regulator so you can power it with 3.3 to 5.0V. However, if you can give it 5.0V that is ideal since the VIN voltage powers the IR LED and the higher the voltage you can give it, the more powerful it is. 

 

Adafruit have working example code for this breakout, in the form of an Arduino sketch. It is easily adaptable to any microcontroller, check out the github repository to download!

 

TECHNICAL DETAILS

- PCB dimensions: 23mm x 23mm (0.9" x 0.9")

- Thickness including tallest SMT components: ~3.15mm (0.125")

- Thickness of PCB: 1.75mm / 0.070"

- This board/chip uses I2C 7-bit address 0x13

 

Links:

VCNL4000 datasheet 

VCNL4000 App Note 

VCNL4000 Product sheet