Obvesti me
Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Vaš email naslov:
  CAPTCHA Image
Varnostna koda:

Pretraživanje
Hrvatski
Slovenski
Hrvatski
English
Deutsch
Italiano
Srpski
Prijava Registracija
NOVI ARTIKLI
AKCIJE
NAJPRODAVANIJI
Troškovi dostave
Odaberi državu
Austria
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Malta
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
Spain
Sweden
United Kingdom
Poštna dostava 5.00 EUR
 
Informacije
Uvjeti i informacije
Pitajte nas
Galago elektronika
Galago d.o.o.
Trg svobode 20
2390 Ravne na Koroškem
Slovenija
E-mail: info@galago.si
Telefon: 00386 (0)2 620 08 14
Telefon: 00386 (0)40 559 432
Facebook

RASPBERRY-PI , RASPBERRY PI, MODEL A+, 256MB, RASPBRRY-MODA+-256M SBC

  Id broj: 412
Marka:RASPBERRY PI
Zaliha:   DA
Cijena:31,19 €
 

Broadcom BCM2835 700MHz ARM1176JZFS processor with FPU and VideoCore IV dual-core GPU

GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode

GPU is capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure

256MB SDRAM (Model A+)

HD 1080p video output

Composite video (PAL/NTSC) output

Stereo audio output

10/100 BaseT RJ45 Ethernet socket (Model B+)

HDMI 1.3 & 1.4 video/audio socket

3.5mm 4-pole audio/composite video out jack socket

4 x USB 2.0 sockets (Model B+), 1 x USB 2.0 socket (Model A+)

15-way MPI CSI-2 connector for Raspberry Pi HD video camera (775-7731)

15-way Display Serial Interface connector

MicroSD card socket

Boots from MicroSD card, running a version of the Linux operating system (See Note below)

40-pin header for GPIO and serial buses (compatible with Raspberry Pi Model A/B 26-pin header)

Header footprint for JTAG connector

Power supply: +5V @ 2A via microUSB socket

Dimensions: 86 x 56 x 20mm (Model B+) 66 x 56 x 14mm (Model A+)

Firmware now looks for add-on boards that comply with the HAT (Hardware Attached on Top) design rules. This allows the Raspberry Pi A+/B+ to set up the GPIO and load drivers to suit an expansion board automatically. 

 

 

Raspberry Pi Sense HAT 8x8 LED matrix display, Accelerometer / Gyroscope / Magnetometer / Air Pressure / Temperature / Humidity Sensor, Small Joystick   Compatible with Raspberry Pi 2 Model B, Raspberry Pi Model B+/A+   ATtiny88, tinyAVR, A...
  Id broj: 565
Marka:RASPBERRY PI
Zaliha:   DA
Cijena:36,53 €
INFO U KOŠARICU