Obvesti me
Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Vaš email naslov:
  CAPTCHA Image
Varnostna koda:

Pretraživanje
Hrvatski
Slovenski
Hrvatski
English
Deutsch
Italiano
Srpski
Prijava Registracija
NOVI ARTIKLI
AKCIJE
NAJPRODAVANIJI
Troškovi dostave
Odaberi državu
Austria
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Malta
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
Spain
Sweden
United Kingdom
Poštna dostava 5.00 EUR
 
Informacije
Uvjeti i informacije
Pitajte nas
Galago elektronika
Galago d.o.o.
Trg svobode 20
2390 Ravne na Koroškem
Slovenija
E-mail: info@galago.si
Telefon: 00386 (0)2 620 08 14
Telefon: 00386 (0)40 559 432
Facebook

RASPIROBOT BOARD, SPARKFUN KIT-11561

  Id broj: 439
Marka:SPARKFUN
Zaliha:   NE
Dobava:7 dani
Cijena:30,69 €
razvojni dodatki SPARKFUN RaspiRobot Board, Sparkfun KIT-11561
razvojni dodatki SPARKFUN RaspiRobot Board, Sparkfun KIT-11561
razvojni dodatki SPARKFUN RaspiRobot Board, Sparkfun KIT-11561
razvojni dodatki SPARKFUN RaspiRobot Board, Sparkfun KIT-11561
razvojni dodatki SPARKFUN RaspiRobot Board, Sparkfun KIT-11561
razvojni dodatki SPARKFUN RaspiRobot Board, Sparkfun KIT-11561
 

The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only problem? The Raspberry Pi may have plenty of low-level hardware peripherals but motor controllers aren’t one of them. That’s why the RaspiRobot project got started. The RaspiRobot board is an expansion board for the Pi that turns it into a robot controller.

 

The board comes as a kit of through-hole parts which is easy to assemble with even a basic soldering iron and limited soldering experience. A step-by-step assembly guide is available to help you through the process.

 

After you’ve assembled it, simply plug the RaspiRobot Board into the GPIO port on the Raspberry Pi and it provides dual bi-directional motor controllers, two open collector outputs, two switch inputs, a pair of status LEDs and even a voltage regulator capable of powering the Pi using a battery source from 7-12VDC.

 

A Python library module makes it easy to interface with the robot hardware from your software on the Pi. The combination of Raspberry PI and the RaspiRobot Board makes it easier and more affordable than you might think to build a robot with computer vision, web access or even machine learning using the linux operating system and Python code.

 

 

Features:

- Dual Bi-directional Motor Control

- Voltage Regulator powers Raspberry Pi from Batteries (7-12V)

- 2 x Open collector outputs (25mA)

- 2 x LEDs

- 2 x Switch inputs

- 5V Serial connector

- 3.3V I2C connector

- Simple to use Python library module

 

Kit Includes:

- RaspiRobot Board PCB

- 1 x L293DNE 4-Channel Motor Driver

- 1 x SN7406N Hex Inverter Buffer/Driver

- 1 x LM2940 Voltage Regulator

- 3 x 270 Ohm Resistors

- 1 x 470 Ohm Resistor

- 4 x 1K Resistors

- 1 x 220uF Capacitor

- 1 x 100uF Capacitor

- 1 x 0.1uF Capacitor

- 2 x Green 3mm LEDs

- 2 x 2-Pin Female Headers

- 2 x Male Pin Headers

- 2 x 4-Pin Female Headers

- 1 x Female Header 2x13

- 2 x 2-Pin 3.5mm Screw Terminals

- 1 x DC Barrel Jack Connector

 

Documents:

- Schematic

- Eagle Files

- Assembly Instructions

- Datasheet (L293DNE)

- Datasheet (SN7406N)

- Python Library

- RaspiRobot GitHub

- Product Video

The Raspberry Pi Model B+ is a credit-card sized computer board that"s up and running when a keyboard, mouse, display, PSU and SD card with installed OS are added. It’s a miniature ARM-based PC which can run many of the applications that normall...
  Id broj: 369
Marka:RASPBERRY PI
Zaliha:   DA
Cijena:36,19 €
NOTES INFO U KOŠARICU