Filtri

Zadnje pregledano

GROVE - I2C MINI MOTOR DRIVER, SEEED 105020010

14,99 €

 

 

The Grove – Mini I2C motor driver is a very tiny motor driver with I2C interface, and it includes two motor driver chips - DRV8830, which helps you control two DC motors or winding of stepper motors on a small board simultaneously. 

 

With four solderable pads back of the board, you can change the I2C address of each motor driver easily. Especially, with the onboard protection circuit, the max limitation current of each channel can be adjusted from 0.2A to 1A, you can set a proper limitation current according to the load.

 

It can be used for battery-powered toys, printers, and other low-voltage or battery-powered motion control applications due to the features.

 

Also, Grove – Mini I2C motor driver is belong to Grove System, you can plug it onto the Base shield and work with Arduino directly without any jumper wires.

 

 

Features:

 

- Tiny driver board

- Two motor driver channels

- Working Voltage : 2.75v – 6.8v

- Changeable max limitation current

- Grove compatible

- I2C interface

- Easy to use

 

 

Please visit Seeedstudio wiki page for more info about this product. It will be appreciated if you can help them improve the documents, add more demo code or tutorials. For technical support, please post your questions to their forum.

 

 

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.