GROVE - LCD RGB BACKLIGHT, SEEEDSTUDIO, 104030001

Grove - LCD RGB Backlight is a full-color backlight 16x2 LCD. High contrast and ease of use make it a perfect I2C LCD display for Arduino and Raspberry Pi.

The traditional 1602 LCD requires up to 10 I/O pins to display, and the 1602 LCD with RGB backlight requires an extra 3 pins to control the backlight color. This will take up a lot of I/O pins on the main control board, especially for development boards with less I/O resources such as Arduino and Raspberry Pi. Grove - LCD RGB Backlight makes it totally different! With the help of Grove I2C connector, only 2 signal pins and 2 power pins are needed. You don't even need to care about how to connect these pins. Just plug it into the I2C interface on Seeeduino or Arduino/Raspberry Pi+baseshield via the Grove cable. No complicated wiring, no soldering, no need to worry about burning the LCD caused by the wrong current limiting resistor.

What's more, this LCD module is not only a character LCD but also can display your DIY images, such as a heart and a smiling face. 16x2 means two lines and each line have 16 columns, 32 characters in total. Each character contains 5*8 pixels. You can check here to make your own images array, just release your creativity and imaginations. 

Features
- Full-color RGB Backlight
- High contrast, clearly visible in direct sunlight
- I2C communication uses only two I/O pins
- Automatic power-on reset

Dimensions: 83mm x44mm x13mm