Proizvod trenutno nije na zalihi. Ispod se možete prijaviti i poslat ćemo vam obavijest kada će proizvod biti na zalihi. Obavijest ćete dobiti samo za ovaj proizvod.
Za traženi proizvod pošaljite poruku/upit nakon čega ćemo vas kontaktirati.
Za traženi proizvod pošaljite poruku/upit nakon čega ćemo vas kontaktirati.
The MKR2UNO Adapter allows you to turn your Arduino UNO form factor based project into a MKR based one without too much effort! You can so upgrade your project with a powerful board with integrated LiPo battery charger.
Tehnical specification
Operating Voltage | 3.3V |
Input Voltage (recommended) | 7-12V |
Input Voltage (limit) | 6-16V |
Analog Input Pins | 6 |
Analog Output Pins | 1 |
Digital I/O Pins | 14 |
DC Current for 3.3V Pin | 700 mA |
DC Current for 5V Pin | 00 mA |
Length | 68.6 mm |
Width | 53.4 mm |
Weight | 24 g |
All the pins on the MKR2UNO Adapter are wired one to one from the MKR to the UNO form factor with some exception:
MKR form factor pin | UNO form factor pin |
0 | 13 |
1 | 10 |
13 | 0 |
14 | 1 |