Filtri

Zadnje pregledano

PROTO-SCREWSHIELD (WINGSHIELD) R3 KIT FOR ARDUINO. ADAFRUI 196

  • Zaliha DA, 23 kom/da kod dobavljača
  • Dobava 7 dani
  • Marka: ADAFRUIT
  • Id broj: 944/
20,85 €

 

DESCRIPTION

 

The next generation Proto-ScrewShield is a dual-purpose prototyping shield. Not only does it have a large 0.1" grid prototyping area but it also extends the Arduino pins to sturdy, secure, and dependable screw terminal blocks. You even get a few bonus terminals for extra GND and four 'free' terminals for whatever connections you wish! New! As of June 23, 2014 we now have an R3 update to this design - adafruit now have a stacking header for the ICSP 2x3 pins and breakout the SCL and SDA pins. It now works much better with R3 UNO's, Mega, Leonardo, as well as stacking nicely with any shield.

 

The stack-able wing design allows you slip this under any shield and still get easy access to the "analog" & "digital" ports of the Arduino. The ScrewShield can be stacked above or below pretty much every other shield.

 

- 1 large high-quality PCB, specifically chosen for its excellent resistance to lots of soldering and desoldering (essential for prototyping boards)

- Plenty of prototyping space, with power/ground rails

- Diffused green power LED, extra diffused red LED for user choice (although we suggest to connect it to pin 13)

- Reset button

- Full set of stacking female header pins

- Lots of 3.5mm terminal blocks to fill 36 breakouts on the board

 

Comes as a kit of all through-hole parts. You'll need to assemble the kit using a soldering iron, diagonal cutters and solder but its an easy kit and should take less than half an hour. Check out tutorial guide for all you need to know to make this kit! (If you have the old 'wings' version, check out this page.)

 

 

 

TECHNICAL DETAILS

 

Details:

- Dimensions: 66mm x 73mm x 10mm (2.6in x 2.9in x 0.4in)

- Weight: 35g(1.25oz)

 

Revision History:

- Prior to June 23, 2014 adafruit had an original non-ArduinoR3/Leonardo Screwshield. Since adafruit wanted to add R3/Leonardo/stacking support, the new version repalces two of the GND pins with SCL and SDA so Leonardo users can use I2C. Adafruit also include a 2x3 stacking header so that SPI-shields can be stacked!

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.