Filtri

Zadnje pregledano

ADAFRUIT FONA - UFL VERSION STARTER PACK, ADAFRUIT 2521

75,55 €




 

DESCRIPTION

 

Build your own cellular project and get off the grid with FONA. This pack comes with an uFL-antenna type FONA and paired with hand-picked accessories. It's the Adafruit FONA - uFL Starter Pack.

 

The FONA miniGSM is an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package.

 

This module measures only 1.75"x1.25" but packs a surprising amount of technology into its little frame. At the heart is a GSM cellular module (adafruit use the latest SIM800) the size of a postage stamp. This module can do just about everything. This starter pack has a uFL connector. For the SMA version, click here! And for the Adafruit FONA 800 uFL Shield version click here!

 

- Quad-band 850/900/1800/1900MHz - connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested)

- Make and receive voice calls using a headset OR an external 8Ω speaker + electret microphone

- Send and receive SMS messages

- Send and receive GPRS data (TCP/IP, HTTP, etc.)

- Scan and receive FM radio broadcasts (yeah, we don't exactly know why this was included but it works really well)

- PWM/Buzzer vibrational motor control

- AT command interface with "auto baud" detection

 

Sounds delicious, right? So adafruit plated this fine module onto a little breakout with all the extras you need to make your next project shine:

- Onboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge over the MicroUSB when necessary. Two LEDs let you know when its charging and done

- Standard 4-pole TRRS headphone jack. Use any 'Android' or 'iPhone'-compatible headset with mic

- Breakouts for external 8Ω speaker and electret mic if you don't want to use a headphone

- Level shifting circuitry so you can run it with 2.8V to 5V logic.

- Vibrational motor (buzzer) driver so you can have noiseless notifications

- uFL connections for external antenna

- Indicator LEDs for power and network connectivity

- Standard SIM slides into the back

 

On its own, this module can't do anything. It requires a microcontroller to drive it! Adafruit suggest and use an Arduino but any 3-5V microcontroller with a UART can send and receive commands over the RX/TX pins.

 

Microcontroller not included! Adafruit recommend an Arduino UNO to go along SIM card not included! If you are in the USA, we recommend TING.

 

This Pack Contains:

- 1x Adafruit FONA - Mini Cellular GSM Breakout uFL Version - v1- 1x Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL

- 1x Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL

- 1x Lithium Ion Polymer Battery - 3.7v 1200mAh

- 1x Mini Metal Speaker w/ Wires - 8 ohm 0.5W

- 1x Wired Miniature Electret Microphone

- 1x Cell-phone TRRS Headset - Earbud Headphones w/ Microphone

- 1x Vibrating Mini Motor Disc

 

 

 

 

TECHNICAL DETAILS

 

This Pack Contains:

- 1x Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL

- 1x Mini Metal Speaker w/ Wires - 8 ohm 0.5W

- 1x Vibrating Mini Motor Disc

- 1x Adafruit FONA - Mini Cellular GSM Breakout uFL Version - v1

- 1x Lithium Ion Polymer Battery - 3.7v 1200mAh

- 1x Wired Miniature Electret Microphone

- 1x Cell-phone TRRS Headset - Earbud Headphones w/ Microphone

 

Datasheets:

- FCC TCB BT

- R&TTE Statement of Opinion

- FCC Part 15B Test Report

- FCC Part 15C Test Report

- FCC RF Test Report

- FCC TCB

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.