Filtri

Zadnje pregledano

HUMIDITY SENSOR BREAKOUT - HIH-4030, SPARKFUN SEN-09569

  • Zaliha GALAGO: DA, 13 kom/da
    Zaliha DOBAVITELJ: DA, 51 kom/da
  • Dobava 7 dani
  • Marka: SPARKFUN
  • Id broj: 351/54
26,84 €

This is a breakout board for Honeywell’s HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as an analog output voltage. You can connect the output of the sensor directly to an ADC on a microcontroller; and, thanks to the sensor’s near linear voltage output, the data is very easy to process.

 

Voltage applied to the supply pins should be within 4-5.8VDC, and optimally at 5V. The sensor will typically only consume about 200μA.

 

This product comes as shown in the picture, with the HIH-4030 soldered onto the breakout board. The pins of the 3-pin header are spaced by 0.1".

 

Features:

- Near linear, analog output

- 4-5.8VDC voltage supply

- All pins broken out to a 0.1" pitch header

- Laser trimmed interchangeability

- Low power design, typical current draw of only 200μA

- Enhanced accuracy

- Fast response time

- Stable, low drift performance

- Dimensions: 0.75 x 0.30 “ (19.05 x 7.62 mm)

 

Documents:

- Schematic

- Datasheet (HIH4030)

- Hygrometer Reconditioning Note

- Bildr Tutorial

 

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.