Description The UPS PIco – LiFePO4 Battery 3000mAh is a LiFePO4 battery specially designed for the UPS PIco and UPS PIco HV3.0. Simply remove the small default LiFePO4 from the PIco and swap it with this larger version to upgrade and extended t...

Description By popular request, you can now get our 7-segment LED backpacks without the LEDs! These backpacks feature an HT16K33 I2C LED driver, they"re simple and easy to use - you can use our very nice library for the backpacks to get running i...

Description Get your "bot rolling with this durable and smooth steel ball caster. It"s really easy to attach, with two screw mounts that will allow you to attach it to any chassis material. Note that it doesn"t come with any mounting hard...

Description Apply 5-12VDC and the stainless steel fibers in this heating fabric will warm up, creating a little heating pad. On one hand, it"s just a gigantic resistor. On the other hand, it"s flexible, light, and can be wrapped around a proj...

Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping the two boards separated, in particular the HDMI port. These standoffs can also be screwed into each other allowing stacking multiple ...

Features 480x320 hardware resolution, software configurable up to 1920x1080 Resistive touch control IPS technology, high quality and perfect displaying from very wide viewing angle Compatible and Direct-connect with any revision of Raspberry Pi (exc...

Hacking vehicles becomes easy with CAN BUS and Arduino! CAN-BUS Shield which adopts MCP2515 CAN-BUS controller with SPI interface and MCP2551 CAN transceiver to give you Arduino/Seeeduino CAN-BUS capability. With the help of CAN-BUS Shield, you can u...

This is a battery holder with 150mm long wire. You can use AA-sized Alkaline or Rechargeable batteries with it. Batteries are not included. Tehnical details Dimensions 85mm x 50mm x 14mm Weight G.W 9g Battery Exclude ...

The W600 Module is a cost-effective 2.4GHz WiFi module support 802.11b/g/n. Seeed W600 Module is based on the W600 chip which features ARM Cortex-M3 with 1MB on-chip flash and freeRTOS kernel. The pins of the W600 chip are extruded and erected on th...

The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic HAT connects the I2C bus (GND, 3.3V, SDA an...

  The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I2C connection. Thanks to its I2C capabilities, this PWM HAT saves the Raspberry Pi"s ...

The SparkFun Differential I2C Breakout is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’s PCA9615 IC, which converts the two default I2C signals into four differential signals, two for SCL...

It"s your basic black action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6.75mm in diameter. This button is perfect for basic On/Off functions. Overall length (including le...

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough for most consumer GPS, ce...

These are our large, beefy aluminum enclosures, which have been built tough enough to withstand a truck. This 2mm-thick, die-cast enclosure is rated IP54 against dust and splashing water. Because it"s aluminum, it"s easy to cut and drill so t...

Description This is a larger size cooling fan with strong wind power and better heat dissipation. It can be used for Raspberry Pi boards and various robots, smart cars, DIY works, effectively reducing the temperature of Raspberry Pi. Screws and nuts ...

Introduction N20 Standard 15mm High universal wheel, flexible steering, suitable for robots, smart cars, good versatility.   Product Parameters Height: 15mm Ball Diameter: φ12m...

Parcel incldued: GIPO extention board*1pcs 40pin rainbow cable*1pcs ...

Original micro bit Switchboard. ...

This is a high-quality universal GPIO extension board compatible with Raspberry Pi 2/ 3 Model B making working easier because of its multi-functional module. You can simply click on them to insert a wire into them, it includes all the mounting hardwa...

Product Details: Wireless Module Condition: New Working voltage :1.8-3.6V Operating frequency:(Module:387-464MHZ) Instantaneous maximum working current: Maximum transmit power: 10mW (+10dBm) Features: 315/433/868/915MHZ ISM band Support 2-FSK, GFSK a...

Module Parameters:  1 Dimensions: 50.5mm (length) * 38.5mm (W) * 18.5 (H)  2 Weight:. 31g  3 PCB Color: Black  4 board four weeks with four screws holes, hole diameter 3.1mm, easy to install and fixed  5 relay of high quality...

Product features: 1.Supporting the D1 MINI 2.The Ar-duino compatible, using A-rduino IDE for programming 3.11 the XI/O pins 4.1 XADC pin (0-3.3 - V) 5.Support the OTA online...

Product features: Model: DS18B20 Voltage Supply: 3V~5.5V Sensor Temperature: -55°C ~ +125°C Thermometer Resolution is User Selectable from 9 to 12 Bits Unique 1-Wire Interface Requires Only One Port Pin for Communication Specifications: Model...

Feature  the z relative humidity and temperature integrated measurement  single wire digital interface (the most simple system integration, ultra-low price) the ultra small the size ( 12X15.5X5.5 mm ) full scale calibration without the need...

Model No.:TS90A Weight:9g Size:23*12.2*22MM Working Voltage:4.8V Dead Zone:8us Quiescent Current:5MA No-load Current:60MA Lock Rotor Current:750MA Working Temprature:-17~55℃ Control Signal:PWM 50HZ/0.5-2.5MS No-load Speed:0.09s/60degree at 4.8V...

For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differenti...

Description • It"s an i2c-controlled PWM driver with a built in clock. That means that, unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, its completely free running! • It is 5V com...

Description Relay coil driving voltage is 5V, the input control level may also be within 5V module description: 1. output driving ability: 250VAC-10A.125VAC-10A.30VDC-10A.28VDC-10A 2. easy to use, each set of output 3 line structure simple, reserved ...

Description Product Parameters Working voltage: DC4.5~20V Trigger mode: L non-repeatable trigger / H repeat trigger (default repeat trigger) Delay time: 0.5~200S Blocking time: default 3~4S Product size: 32mm*24mm Quiescent current: <50uA Level ou...