Filtri

Zadnje pregledano

ADAFRUIT SENSIRON SHT31-D TEMPERATURE & HUMIDITY SENSOR BREAKOUT, ADAFRUIT 2857

  • Zaliha GALAGO: DA, 3 kom/da
    Zaliha DOBAVITELJ: DA, 276 kom/da
  • Dobava 7 dani
  • Marka: ADAFRUIT
  • Id broj: 824/55
19,45 €

DESCRIPTION

Sensiron Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally adafruit have some that have a true I2C interface for easy reading. The SHT31-D sensor has an excellent ±2% relative humidity and ±0.3°C accuracy for most uses.

Unlike earlier SHT sensors, this sensor has a true I2C interface, and (bonus!) even with two address options. It also is 3V or 5V compliant, so you can power and communicate with it using just about any microcontroller or microcomputer.

Such a lovely chip - so adafruit spun up a breakout board with the SHT31-D and some supporting circuitry such as pullup resistors and capacitors. Each order comes with one fully assembled and tested PCB breakout and a small piece of header. You'll need to solder the header onto the PCB but it's fairly easy and takes only a few minutes even for a beginner.

Check out the tutorial for pinouts, assembly, wiring & tests, and more!

TECHNICAL DETAILS

Datasheet

- Uses I2C address 0x44 or 0x45

- 12.7mm x 18mm x 2.6mm 

- Weight: 0.8g

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.