Filtri

Zadnje ogledano

FLEX SENSOR 2.2 INCH, SPARKFUN SEN-10264

11,43 €

A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad!

 

The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).

 

Connector is 0.1" spaced and bread board friendly. Check datasheet for full specifications.

 

Note: Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex.

 

 

Documents:

- Datasheet

- ITP Sensor Workshop

- Quickstart Guide

- Bildr Tutorial

 

 

 

 

 

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.