Proizvod trenutno nije na zalihi. Ispod se možete prijaviti i poslat ćemo vam obavijest kada će proizvod biti na zalihi. Obavijest ćete dobiti samo za ovaj proizvod.
Za traženi proizvod pošaljite poruku/upit nakon čega ćemo vas kontaktirati.
Za traženi proizvod pošaljite poruku/upit nakon čega ćemo vas kontaktirati.
Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect
Ideal for price tags, shelf labels, industrial instruments...
OPERATING VOLTAGE | 3.3V | GREY SCALE | 2 |
---|---|---|---|
INTERFACE | 3-wire SPI, 4-wire SPI | PARTIAL REFRESH TIME | 0.3s |
OUTLINE DIMENSIONS | 69.15 × 38.90mm | FULL REFRESH TIME | 2s |
DISPLAY SIZE | 48.55 × 23.70mm | REFRESH POWER | 26.4mW(typ.) |
DOT PITCH | 0.194 × 0.194mm | STANDBY CURRENT | |
RESOLUTION | 250×122 pixels | VIEWING ANGLE | >170° |
DISPLAY COLOR | black, white | TOUCH POINT | 5 (max) |
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Compatible With Raspberry Pi Series Boards
I2C For Touch Panel, SPI For Display
VCC | 3.3V |
GND | GND |
DIN | SPI MOSI pin |
CLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data / Command selection (high for data, low for command) |
ERST | External reset, low active |
BUSY | Busy status output, high active |
INT | Touch controller interrupt signal |
SCL | Touch controller I2C clock pin |
SDA | Touch controller I2C data pin |
TRST | Touch controller reset, low active |